Flow Calibration Laboratory
Eureka has established a wet Flow calibration laboratory for calibration of various flowmeters.This laboratory is NABL accredited and offers both gravimetric and comparison methods of calibration standards.
It can calibrate instruments from 15 NB to 600 NB in size and flow rates from 100 lph to 100,000 lph.
The uncertainty of primary standard is 0.3% and for comparison standard it is 0.5%.
Flowmeters such as Rotameters, DP elements, Turbine, Vortex or Coriolis mass flowmeters can be calibrated on this system.
The laboratory is automated using a SCADA system and certified professionals are operating the same.
Specification:
Accuracy: ±2 % FS
Wetted parts: CS/MS/SS/PTFE-lined / Rubber-lined
Accessories: Flow-switch for control
Accuracy: ±2 % FS
Wetted parts: CS/MS/SS/PTFE-lined / Rubber-lined
Accessories: Flow-switch for control
Applications:
Water / Pharma / Chemical / Fertilizers / Power / Petrochem / Refinery
Water / Pharma / Chemical / Fertilizers / Power / Petrochem / Refinery
Features:
• Max Temp 250 °F
• Max Pressure 25 Bar
• Channels 8, 16 or 24
• O/P 4-20 mA (2 nos)
• Max Temp 250 °F
• Max Pressure 25 Bar
• Channels 8, 16 or 24
• O/P 4-20 mA (2 nos)
Catalog PDF:
Download Catalogue
Download Catalogue
Mass Flow calibration
In house calibration laboratory traceable to national standards, in Pune.Primary standard using piston prover for calibration from 1.25 mln/min to 10,000 mln/min.
Comparison method using rotary meter from 2.5-25 m3/hr..
The system accuracy is 0.3 to 0.4% based on flow rate.
Any make of Mass flowmeters/controller can be calibrated.
Eureka does provide onsite calibration facility for the manufacturing plants or R & D Labs.
Specification:
Accuracy: ±2 % FS
Wetted parts: CS/MS/SS/PTFE-lined / Rubber-lined
Accessories: Flow-switch for control
Accuracy: ±2 % FS
Wetted parts: CS/MS/SS/PTFE-lined / Rubber-lined
Accessories: Flow-switch for control
Applications:
Water / Pharma / Chemical / Fertilizers / Power / Petrochem / Refinery
Water / Pharma / Chemical / Fertilizers / Power / Petrochem / Refinery
Features:
• Max Temp 250 °F
• Max Pressure 25 Bar
• Channels 8, 16 or 24
• O/P 4-20 mA (2 nos)
• Max Temp 250 °F
• Max Pressure 25 Bar
• Channels 8, 16 or 24
• O/P 4-20 mA (2 nos)
Catalog PDF:
Download Catalogue
Download Catalogue
Mass Flow Calibration
In house calibration laboratory traceable to national standards, in Pune.Primary standard using piston prover for calibration from 1.25 mln/min to 10,000 mln/min.
Comparison method using rotary meter from 2.5–25 m³/hr.
The system accuracy is 0.3 to 0.4% based on flow rate.
Any make of Mass flowmeters/controller can be calibrated.
Eureka does provide onsite calibration facility for the manufacturing plants or R&D Labs.
Address List
- 17 – 20, 1st Floor, Royal Chambers, Paud Road, Pune 411 038, Maharashtra, India.
- 91-20-25443079
- Sales@eurekaflow.com
Social Networks
- yourfbusername
- @twitterhandle
- insta_account
- plusprofilename
- username
Copyright © 2016. All Rights Reserved. Terms & Conditions | Disclaimer | Privacy Policy